10 HP air to water cooled Metal finishing chillers

Air-cooled type metal finishing chiller OMC-10A cooling capacity 25 KW. Widely used in anodizing cooling, laser cooling. Simple operation, easy installation.
  • Item NO.:

    OMC-10A
  • Payment:

    T/T, L/C, WEST UNION
  • Product Origin:

    CHINA
  • Color:

    CUSTOMIZE
  • Shipping Port:

    SHENZHEN
  • Lead Time:

    7-10 Working days
  • Order(MOQ):

    1
  • Product Detail

10 HP air to water cooled  Metal finishing chillers


As we know most metal finishing process, such anodizing or plating, generates amount of heat which must to be dispatched to ensure the top quality of final products, so anodizing plating chillers can be utilized to remove heat generated during metal finishing process by keeping the best suitable temperature which is needed for anodizing & plating. Metal finishing chillers can use air to water cooled chiller or water to water cooled chiller, if the cooling capacity is large, we also can use screw type chiller. 


Like other cooling systems that function with heat exchangers, induction furnace cooling systems typically utilize a glycol-water mixture as coolant. This water-cooled induction heater will help to attain the desired thermoregulation.


Metal finishing process chillers include many applications like:

Laser cooling system,

Anodizing cooling system,

Paint and powder coating cooling system

Quench cooling system

Furnace cooling system

Induction furnace coil cooling system

Die casting cooling system

Spot welding system


Industrial air chiller Products Information


●:Chiller cooling capacity 1 Ton to 40 Ton

●:Temperature control 7℃ to 35℃

●:Temperature stability ±0.5℃ to ±2℃

●:Large Copper Condensing Coil with Aluminum Fins

●:Built-in SS water tank and water pump

●:Schneider Electrical components & Mic-computer control panel

●:Easy installation and operation

●:Compact design with portable wheel

●:Low maintenance cost



Metal Finishing Chiller Application

Anodizing Cooling System

Anodizing of a metal part refers to processes that coat its exterior with a metallic film. The metal component to be treated is designated the anode of an electrolytic cell which also contains a cathode made of another element and these components are submerged in a chemical bath.

 

When an electrical current is passed through the setup, it dislodges metallic ions from the cathode and deposits it as a film on the anode. The thickness of the deposited layer depends on the duration of exposure of the anode within the electrically charged bath.

 

As earlier stated, the anodizing process will generate a significant amount of heat which needs to be eliminated from the process to ensure effective and even metallic oxide deposition.

 

OUMAL metal finishing chillers can be effectively employed to maintain anodizing temperatures at optimal levels. The use of air-cooled chillers or water-cooled chillers alongside the electrochemical vats to achieve this result.

 

Spot Welder Cooling System

When resistance electrodes are used to weld a joint, the heated electrodes are subjected to very high temperatures within a very short period. The use of water-cooling systems will prevent the electrodes from undergoing premature burnout.

 

Typically, a water tube located within each electrode is used to maintain the welding temperatures at a stable state inhibiting electrode breakdown and poor weld strength.

 

Quench Tank Cooling

This technique of metal cooling involves the complete immersion of the material into a container surrounded by a heat exchanger. Heat transferred from the metallic part to the cooling tank is dissipated by the thermal exchanger through which a coolant (usually a mixture of glycol and water) from a chiller unit is circulating.

 

Die Cast Cooling System

Metal forging in various shapes and designs is a process that requires close thermal regulation to ensure optimal results. The typical set up for die casting cooling systems includes a cooling basin/mold into which the molten metal can be poured. Attached to this vessel is a heat exchanger that circulates chilled fluid that pulls heat away from the process.

 

Induction Furnace Cooling System

Various methods are currently being employed to achieve induction cooling. Most industrial induction cooling equipment uses a closed-loop setup that conveys air or water within a heat exchanger surrounding the manufacturing process.


metal finishing chillers



Products Specification


  Model      Item

OMC-10A

Cooling Capacity

KW

27

Kcal/h

23220

Ton

7.7

Btu/h

92150

Input Power

KW

9.2

Power supply

3ph-380V-50Hz

Temperature Range

5-35

Refrigerant

Type


R22(R407C/R410A/R134A)

Compressor

Control Mode


expansion valve

Type


Piston Type / Scroll Type

Power

KW

7.5

Chilled water

Tank Volume

L

180

Tank Material


SUS304 Stainless Steel

Pipe Diameter

inch

1-1/2〃

Pump

Lift

m

20

Power

kw

1.5

Evaporator

Type


Tank with coil(Shell and Tube)

Chilled Water Flow

m³/h

4.6

Condenser

Type


High efficiency copper condensing coil with Aluminum+Spiral axial flow fan

Cooling Water Flow

m³/h

10000

Dimension

Length

mm

1500

Width

mm

770

Height

mm

1400

Weight

KG

350

Safety Protection : Compressor overheating protection, over-current protection, high and low pressure protection, over-temperature protection, flow protection, reversed and lacking phase protection, exhaust overheating protection.



Package & Shipping 



FAQ


Q1: Could you help us to recommend the model for our project?

A1: Yes, we have engineer to check the details and make the scheme for you. Based on the following:

1)Cooling capacity;

2)chilled water inlet and outlet temperature

3)chilled water flow

4) Refrigerant;

5) Ambient temperature;

6)Voltage;

7) Be used for what industry?

8)Any other special requirements?


Q2: How to ensure your product with good quality?

A2: All our products with CE certificate. And use the well-know brand accessories, such as copeland, danfoss,Hanbell, Bitzer compressor Emerson expansion Valve, Siemens controller.

also can be customized. All OUMAL Chillers are factory tested under load conditions to ensure good quality and easy installation for users


Q3: What's the warranty?

A3: 15 months warranty for free if confirmed by both side damage in the quality reason.


Q4: Whats your payment term?

A4: We accept T/T, LC, Western Union, etc. Normally, 30% deposit for production, 70% balance before shipment.


Q5: Are you a manufacturer?

A5: Yes, we have more than 15 years in water chiller business. Also have patent on the water chiller appearance.

The control box design make the unit safety and stably.


Q6: How can i Place an order

A6: Click Below to fill the table or Call 0086 15112554736



Want to know about this product?

SEND A MESSAGE
Something isn’t Clear?

Feel free to contact me, and I will be more than happy to answer all of your questions.

Related Products
plastic provessing chiller for molding
Plastic proccessing chiller for injection molding machine
Plastic proccessing chiller for injection molding machine 3 Ton cooling capacity OMC-5A. Industrial process chillers air cooled scroll type small chillers easy to install, easy to move.
industrial glycol cooling system
100 HP Glycol chiller for nano brewery
100 HP Glycol chiller for nano brewery OMC-100WDL. 
concrete batch plant chiller
200HP screw type Concrete batch plant water chiller
200HP screw type Concrete batch plant water chiller OMC-200WSH. Fresh water chiller,Chilled water outlet temperature 5℃.
 water cooled screw chiller
60 Ton water cooled screw chiller for extruder process
60 Ton water cooled screw chiller for extruder process OMC-60WSH. Shell and tube condenser, Plastic extrusion water screw chiller cooling capacity from 30Ton to 600Ton optional.
water chiller for food processing
Air Cooled Water Chiller for Food Processing
Air Cooled Water Chiller for Food Processing OMC-5A. Adopt 304 Stainless Steel Metal for housing, Evaporator use Stainless steel Plate Heat Exchanger with 304 Stainless Steel Water Tank and Pump. 
100 Ton Air-Cooled Chiller
100tr Air Cooled Chiller For Plastic Process Cooling Water System
Our 100 ton air-cooled chiller provide a convenient and cost-effective solution. They are often used to cool equipment and serve in climate control applications for large areas like corporate event venues, warehouses, and manufacturing facilities.
100 Ton Chiller
100 Ton chiller for stretch film machine cooling water system
The 100 Ton chiller for stretch film machine cooling water system is an air cooled screw water chiller. The 100 ton air cooled chiller adopt 2 high quality semi-hermetic screw compressors Hanbell or Bitzer. As an industrial air cooled chiller supplier, We provide Personalized customization service for the industrial chillers with competitive price. The 100 ton air cooled chiller widely used in plastic process cooling water system. 
outdoor air cooled chiller
40HP 100KW outdoor chiller water proof air cooled scroll chiller
40HP 100KW packaged air cooled chiller for outdoor use or indoor use. Build in Copeland / Danfoss Scroll compressors with high quality and efficient. Easy installation & operation. Special size can be customized. 
Copeland compressor air cooled chiller
30HP air cooled plastic process chiller for plastic extrusion machine
A 30HP air-cooled plastic process chiller is a cooling system commonly used in plastic extrusion processes to maintain the temperature of the equipment and the extruded plastic. This type of chiller is crucial for ensuring the quality of the plastic products and the efficiency of the production process.
Sign Up For Newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Chat Now
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact