• 240HP Air Cooled Screw Chiller solution for Pharmaceutical factory
    240HP Air Cooled Screw Chiller solution for Pharmaceutical factory
    Biopharmaceuticals is an industry that has strict product quality production processes and production equipment. In the biopharmaceutical industry, the freezing and cooling system is often a prerequisite to ensure the effectiveness of the materials used. In many places during the storage, processing, reaction stirring, and packaging of the materials, improper temperature handling causes the failure of the materials and their Wind damage, and because of the particularity of the biopharmaceutical industry, there is a special need for temperature, and the temperature is controlled differently in different process stages. At this time, higher requirements are placed on the chiller of the refrigeration equipment. Oumal's technology team knows the importance of supply chain temperature in the biopharmaceutical process, and a reliable refrigeration system equipment is a strong guarantee for production efficiency and quality. According to the requirements, our engineer work out the cooling water system for customer. Air cooled screw chiller cooling capacity: 600kw; Adopt 2 sets high efficient Hanbell semi-hermetic screw compressors, double loop shell and tube condenser, Clear water aluminum sheet prevents rainwater corrosion, High-efficiency internally threaded copper pipe increases heat exchange area, Large air volume axial flow fan. Siemens PLC control system, Siemens PLC control system, precise temperature control. Please contact us to get your best solution for your Medicine chiller.
  • 220HP Air Cooled Screw Chiller Solution for Extruder Granulator
    220HP Air Cooled Screw Chiller Solution for Extruder Granulator
    The existing granulator is generally composed of an extrusion system, a transmission system and a heating and cooling system. Among them, the heating and cooling device is an indispensable device for the plastic extrusion process. In the working process of the granulator, because the extrusion system in order to better mix and melt the plastic raw materials and extrude the required particle size, the heating part of the heating and cooling device heats it at a high temperature, so that the temperature of the entire granulator is High, but the temperature is too high, and the plastic raw materials are easily decomposed. Therefore, it is necessary to cool the pelletizer and the internal plastic raw materials in time during the extrusion process of the pelletizer. The cooling of the ordinary granulator is generally completed by the cooling part of the heating and cooling device, and the cooling part generally adopts the natural cooling method, that is, the circulating cooling water is passed into the granulator, and the cooling water is combined with the cooling part. The heat exchange between the pelletizer or the plastic raw material can achieve the cooling effect. However, the temperature of the circulating cooling water will increase after repeated cooling cycles, and the cooling water after the temperature has increased will not be conducive to further cooling, resulting in lower cooling efficiency and poor reliability. Therefore, as an indispensable equipment in industrial cooling, the industrial chiller has also become the best solution for the water cooling system of the granulator in this case. According to the customer's actual cooling capacity requirements, after calculation by our professional engineers, we finally designed a 150 ton air cooled screw chiller (220 HP air cooled screw chiller) for the customer. The 220 HP air-cooled screw chiller uses two Hanbell semi-hermetic screw compressors. The control system is controlled by Siemens PLC. The evaporator adopts a double loop shell and tube type. Internal and external threaded copper pipes are used inside, which has a good cooling effect. If you are also looking for an air-cooled screw chiller manufacturer, please contact us and we will recommend the best chiller solution for you.
  • 200HP Water Cooled Screw Chiller Solution for Shoe factory
    200HP Water Cooled Screw Chiller Solution for Shoe factory
    In order to improve the color of the leather and increase the production efficiency in the embossing machine, rubber roller cooling and other processes, the use of additional auxiliary industrial chillers is the correct choice. The embossing machine is mainly used for embossing on various fabrics. The rubber roller (also stainless steel roller) on the embossing machine will generate high temperature during work. In order to ensure product quality and improve work efficiency, it is necessary to equip an industrial chiller for cooling and temperature control. The temperature is between 12°C and 18°C. After the data provided by the customer and the calculation of our technicians, our temperature control solution started from the data provided by the technicians in the tannery, and finally selected the 180 ton screw water-cooled chiller, which perfectly solved the problem of cooling and cooling for the customer, and successfully signed Production and installation are ordered under the contract.   After the installation and commissioning of the water-cooled screw chiller is completed, the temperature control temperature is set at 12℃ to quickly reach this constant temperature, and then the compressor stops running, and when the detected temperature exceeds 12℃, it will automatically start working. High efficiency and energy saving, and can ensure that the compressor in the chiller has enough rest time.   Oumal Machinery is here to remind you manufacturers who need industrial cooling systems and cooling equipment. When purchasing water-cooled screw-type industrial chillers, you can choose a model with a higher cooling capacity than the actual demand, so as to avoid the need for industrial chillers in 24 hours. It can work well under full-load operation within hours.
  • 100HP Water Cooled Screw Chiller Solution for Chemical plant
    100HP Water Cooled Screw Chiller Solution for Chemical plant
    Chemical materials are reacted under certain temperature, pressure and other conditions to achieve the required conversion rate and yield of the reaction. In chemical processes such as oxidation, reduction, metathesis, vulcanization, isomerization, polymerization, separation, etc., it is often necessary to maintain a precise specified temperature during operation to ensure the progress of the process and the stability of the product. For example, in the process of potassium chloride crystallization, cooling crystallization is a very important process. The use of refrigeration chillers can effectively increase the output and ensure product stability. This case of the chemical industry chiller uses a 100 HP water-cooled screw chiller, equipped with a cooling water tower, a stainless steel heat preservation water tank, and is installed on the roof of the plant. The chiller uses a semi-hermetic screw compressor, Siemens PLC control system, and the chiller's outlet temperature is 5-35 degrees.
  • 80HP Water Cooled Screw Chiller Solution for Plastic factory
    80HP Water Cooled Screw Chiller Solution for Plastic factory
    Plastic products have become indispensable products in our daily lives, such as plastic cups, films, electronic product casings, stationery, etc. Processing equipment such as injection molding machines, extruders, blown film machines, compression molding machines during the production of these products Water chillers are needed in various processing equipment, which can help the plastics industry shorten the demolding time, increase output, increase production efficiency, and ensure product stability during the production process. Air-cooled chillers, water-cooled chillers, or open chillers can be selected according to the actual needs of the factory. In this solution of plastic factory cooling system. due to needs of the the large amount of chilled water. we equipped customers with 3 tons of chilled water with double-layer stainless steel insulated water tanks for centralized water supply. What we do for our customers is a water-cooled screw chiller solution. The chiller uses 60 HP Hanbell Semi-Hermetic Screw compressor, shell and tube evaporator and condenser. The electronic control part uses Schneider Electric, PUNP LCD touch screen, and a spare water pump is designed. , To ensure the uninterrupted operation of the unit 24 hours a day. Specially equipped with chiller machine room, the chiller host, water pump and water tank are installed in the machine room. The cooling water tower is installed outdoors to improve the heat dissipation effect. If there is a demand for chillers in the plastics industry, please contact us to obtain the most suitable solution for you and the best quality chiller price.
  • Chiller for Central Air Conditioner
    Chiller for Central Air Conditioner
    Central air-conditioning chillers are mainly used for central air-conditioning systems in large shopping malls, hospitals, factory workshops, office buildings, hotels and other occasions. The chilled water provided by the chillers is used to adjust the ambient temperature. It must be used with fan coils and air-conditioning terminals. Under normal circumstances, users mostly choose water-cooled air-conditioning chillers, of course, some users like to use air-cooled. In comparison, water-cooled air-conditioning chillers need to be equipped with auxiliary equipment, and the refrigeration is more stable, while air-cooled air-conditioning chillers do not require auxiliary equipment and are simple to install, but they have requirements for the installation environment. Here we use an air-cooled central air conditioning chiller as the main engine, and the compressor is a German Bitzer semi-hermetic screw compressor, which has stable and reliable operation, high efficiency, low failure, performance, low vibration, low noise, and energy saving Easy maintenance, long life and other advantages. The copper tube of the evaporator adopts internal and external threaded reinforced tube, which has a good cooling effect. The control system adopts Siemens PLC, which can be used for remote monitoring and control. It has multiple functions such as automatic loading and unloading, timing switch on and off, and recording the cause of failure. The operation is simple, and the host is connected to the power supply. The failure rate is low and the safety factor is high. The installation is simple, the system control can be adjusted in time, and it is intuitive and reliable. Oumal is a leading industrial chiller supplier, we have professional team and will adjust the customer plan according to the customer's cooling capacity needs, depending on whether the customer uses a scroll chiller or a screw chiller, an air-cooled chiller or a water-cooled chiller, and customizes your own refrigeration system for you. Please tell us your needs, we will give you high-quality chiller solutions, preferential chiller prices.
1 2

A total of 2 pages

Sign Up For Newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Chat Now
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact